DJI Matrice 400 with Zenmuse L3 flying over mountains

DJI Zenmuse L3

Long-range LiDAR and 100 MP mapping cameras for terrain, corridors and large sites, in one flight.

Overview

The DJI Zenmuse L3 is a long-range LiDAR payload for the DJI Matrice 400. It pairs a 1535 nm laser that reaches 950 m with two 100 MP mapping cameras, so one flight gives you an accurate point cloud and true-colour imagery. Up to 16 returns per pulse let it map the ground under vegetation, and it covers up to 10 km² per flight.

Map more ground, including what's under the trees

LiDAR measures the ground directly, so you get accurate terrain where cameras can't see it.

Multiple returns icon

See the ground through vegetation

Up to 16 returns per pulse let the laser reach the ground under trees and scrub, where cameras only see the canopy.

Coverage icon

Cover more ground

Long-range LiDAR lets you fly higher and wider, covering up to 10 km² per flight on the Matrice 400 and up to 100 km² in a day.

Accuracy icon

Accurate from higher up

3 cm vertical accuracy at 120 m and 5 cm at 300 m, so you can survey from a safer height.

Point cloud icon

Point cloud and colour in one flight

Dual 100 MP mapping cameras capture true-colour imagery alongside the LiDAR, so you don't need a second flight.

DJI Zenmuse L3 for mining, utilities and environment

Accurate terrain and point clouds for big sites, long corridors and covered ground.

DJI Matrice 400 with Zenmuse L3 surveying a mine site

Mining

Survey pits, waste dumps and haul roads from a safe height, and reach the ground under rehabilitation planting. Volumes and terrain models come from the point cloud, with true-colour imagery from the same flight.

Aerial close-up of a transmission tower insulator during a power line inspection

Power line and corridor mapping

Map transmission corridors, vegetation encroachment and conductor clearances. The L3 picks up a 21.6 mm conductor at up to 300 m, so you can model lines without flying close to them.

LiDAR beam scanning a forested hillside

Forestry and environment

Measure terrain, tree height and canopy structure across large areas of bush or plantation. Multiple returns separate the canopy from the ground, giving you a bare-earth model even under dense cover.

Range icon

Long-range 1535 nm LiDAR

Up to 950 m at 10% reflectivity.

Multiple returns icon

Up to 16 returns

Penetrates vegetation to reach the ground.

Camera icon

Dual 100 MP cameras

4/3 CMOS mapping cameras with mechanical shutters.

Compliance icon

Class 1 eye-safe laser

Safer to fly over people and property.

Payloads

The payload decides what data you get. Start with the job you need done, and we'll match the payload to it.

DJI Matrice 400 with Zenmuse H30 zoom camera
Zoom inspection, day and night

DJI Zenmuse H30

The H30T without thermal. Long-range zoom and full-colour night vision for visual inspection and security work.

  • Zoom and wide imagery
  • Full-colour night-vision imagery
  • Target coordinates from the laser rangefinder
DJI Matrice 400 with Zenmuse H30T detecting people and vehicles
Thermal inspection and search and rescue

DJI Zenmuse H30T

Thermal, wide and zoom cameras with a laser rangefinder in one payload, so one flight gives you the hot spot, the close-up and its coordinates.

  • Radiometric thermal imagery
  • Zoom and wide imagery
  • Target coordinates from the laser rangefinder
DJI Zenmuse P1 mapping camera
Photogrammetry and orthomosaics

DJI Zenmuse P1

A 45 MP full-frame mapping camera with a mechanical shutter, for accurate orthomosaics and 3D models of pits, stockpiles and sites.

  • Orthomosaics
  • 3D models
  • Volume and stockpile measurements
DJI Zenmuse L3 LiDAR payload
Survey-grade 3D mapping

DJI Zenmuse L3

Long-range LiDAR and dual 100 MP mapping cameras in one payload. On the Matrice 400 it covers up to 10 km² per flight and up to 100 km² in a day.

  • Survey-grade point clouds
  • True-colour 3D models
  • Digital elevation and terrain models
Hardware

Long-range LiDAR, built for the Matrice 400

DJI Matrice 400 carrying the Zenmuse L3 LiDAR payload

Zenmuse L3

The L3 combines a 1535 nm long-range LiDAR with two 100 MP 4/3 mapping cameras on one gimbal. The LiDAR reaches 950 m at 10% reflectivity with up to 16 returns per pulse, and the cameras cover a 107° combined field of view, so one flight gives you the point cloud and the colour imagery.

A high-accuracy IMU and RTK positioning deliver 3 cm vertical and 4 cm horizontal accuracy at 120 m. It's rated IP54 and operates from −20 °C to 50 °C.

High-accuracy IMU inside the Zenmuse L3

Built for the Matrice 400

The L3 mounts on the DJI Matrice 400 through the single gimbal connector. With the Matrice 400's long flight time and power line sensing, it can cover big, complex sites in fewer flights.

Data is stored on a CFexpress Type B card and processed in DJI Terra, which exports LAS, LAZ, PLY and other standard formats for your existing GIS and survey software.

Hubs and managed operations
Explore our Hubs
Software

From planning to data delivery, in one platform

Curo is where your L3 survey flights are planned and managed. Plan missions, manage your pilots and aircraft, and keep the flight records your ReOC depends on in one place.

If your team uses ArcGIS, our Esri Site Scan integration sends processed data straight into your GIS, without any manual handling.

Explore Curo

Curo live dock control screen showing dock camera feeds and a satellite map
Drone inspection of a transmission tower insulator

Prefer DJI FlightHub 2?

Plan LiDAR missions in DJI Pilot 2, then process point clouds and imagery in DJI Terra and export LAS, LAZ or PLY files for your survey and GIS software.

Sphere remote operations centre team running live drone missions

What you need to map with the Zenmuse L3

LiDAR surveys take more than the payload. Here's what's involved, and where we can help.

Aircraft icon

A DJI Matrice 400

The L3 is built for the Matrice 400 and mounts through its single gimbal connector.

How we help: we'll supply the aircraft, payload and kit as one package.

Training icon

Training and approvals

Pilots need a RePL that covers a 15.8 kg aircraft, and the business running the flights needs a ReOC.

How we help: RePL, ReOC and Chief Remote Pilot training, or we can fly it for you.

Kit icon

Processing and storage

LiDAR data needs processing in DJI Terra or your own point cloud software, plus fast CFexpress cards and enough storage for large datasets.

How we help: we'll set up a workflow that gets point clouds into your GIS.

DJI Zenmuse L3 pricing and availability in Australia

Buy the payload for your Matrice 400, or add our help to get your team mapping.

DJI Zenmuse L3 LiDAR payload
Standalone payload

DJI Zenmuse L3

Price on enquiry
  • Zenmuse L3 LiDAR payload
  • Single gimbal connector for the Matrice 400
Sphere support add-on

Set-up, training and support

Price on enquiry
Quoted to your team
  • Aircraft and kit selection
  • Payload set-up and calibration checks
  • Operator and processing training
  • Ongoing support

Zenmuse L3 or Zenmuse P1?

Both map from the Matrice 400. Choose based on the ground you're surveying.

DJI Zenmuse L3
DJI Zenmuse L3
DJI Zenmuse P1
DJI Zenmuse P1
Best for
LiDAR mapping under vegetation and over large areas
Photogrammetry on open ground
Jobs it suits
Terrain under canopy, power line corridors, large-area surveys
Site surveys, stockpile volumes, urban and cadastral mapping
Key difference
Long-range 1535 nm LiDAR plus dual 100 MP mapping cameras
45 MP full-frame camera with a mechanical shutter
The data you get
Point clouds, terrain models and true-colour 3D models
Orthomosaics, surface models and textured 3D models

Want the full breakdown? Read more

Guides and technical comparisons

Take the detail away with you, or share it with the people signing off.

No items found.
Case study

Two Weeks to Two Days: Surveying 3,800 Hectares of Queensland Sugarcane with the DJI Matrice 400

A LiDAR drone-mapping workflow built around the DJI Matrice 400 and Zenmuse L3 has cut full-property survey time from two weeks down to approximately two days, changing how the property's management team plans and acts.

Read the full case study
Sphere remote operations centre team running live drone missions
Why Sphere

We don’t just sell drones. We turn data into better decisions.

Approvals icon

Approved to fly for you

We hold a CASA ReOC and Broad Area BVLOS Approval, so we can run operations for you under our own approvals.

SphereROC icon

Operators, not just resellers

Our team runs remote operations every day from our Remote Operations Centre, our 24/7 Sydney-based operations centre.

Support icon

Local support for the long haul

Training and setup from our Australian team, with servicing and support for the life of your fleet.

Scalable hardware icon

Our own hardware and software

We design and build our Hubs and Curo software in Australia, so you can grow from one drone to automated operations.

Specifications

  • LiDAR: 1535 nm, up to 950 m at 10% reflectivity
  • Returns: Up to 16
  • Accuracy: 3 cm vertical, 4 cm horizontal at 120 m
  • Mapping cameras: Dual 100 MP 4/3 CMOS
  • Coverage: Up to 10 km² per flight on the Matrice 400
  • Laser class: Class 1, eye-safe
  • Ingress rating: IP54, operating from −20 °C to 50 °C
  • Compatible aircraft: Matrice 400

Full Zenmuse L3 specifications

General

  • Weight: 1.60 kg (single gimbal connector adds 145 g)
  • Dimensions: 192×162×202 mm
  • Power: 64 W typical; 100 W max
  • Ingress protection rating: IP54
  • Operating temperature: −20 °C to 50 °C
  • Supported aircraft: Matrice 400 (single gimbal connector required)

System performance

  • Detection range: 950 m at 10% reflectivity (100 kHz); 700 m at 10% (350 kHz); 2000 m at 80% (100 kHz); default max 900 m
  • Wire detection: 300 m for 21.6 mm steel-core aluminium stranded wire
  • Point cloud accuracy: 120 m: 3 cm vertical, 4 cm horizontal; 300 m: 5 cm vertical, 7.5 cm horizontal
  • Point cloud thickness (1σ): 1.2 cm at 120 m; 2 cm at 300 m

LiDAR

  • Wavelength: 1535 nm
  • Laser class: Class 1 (IEC 60825-1:2014)
  • Beam divergence: 0.25 mrad
  • Returns: Up to 16 (100 and 350 kHz); 8 (1000 kHz); 4 (2000 kHz)
  • Scan modes: Linear 80°×3°; star-shaped and non-repetitive 80°×80°
  • Ranging accuracy: ±10 mm absolute; repeatability under 5 mm (1σ)
  • Minimum detection distance: 10 m

RGB mapping cameras

  • Sensor: Dual 4/3 CMOS, 107° combined horizontal FOV
  • Pixels: 100 MP (12288×8192) or 25 MP
  • Lens: 28 mm equivalent; f/2.0–f/11
  • Shutter: Mechanical up to 1/2000 s; electronic up to 1/16000 s
  • Photo interval: 0.5 s (25 MP JPEG); 1 s (100 MP JPEG)
  • Average GSD: 3 cm at 300 m

POS and gimbal

  • POS update rate: 200 Hz
  • Attitude error (post-processed): Yaw 0.02°; pitch and roll 0.01°
  • RTK positioning: 1.0 cm + 1 ppm horizontal; 1.5 cm + 1 ppm vertical
  • Gimbal: 3-axis, ±0.01° angular accuracy, detachable DJI SKYPORT

Data

  • Storage: CFexpress Type B card
  • Processing: DJI Terra (exports LAS, LAZ, PLY, PCD, PNTS, S3MB)
  • Cloud: DJI FlightHub 2

FAQs

How much does the DJI Zenmuse L3 cost in Australia?

Price depends on the aircraft, kit and support you need. Enquire and we'll quote a setup to match your work.

Which drones work with the Zenmuse L3?

The DJI Matrice 400. It mounts through the single gimbal connector.

How accurate is the Zenmuse L3?

DJI rates it at 3 cm vertical and 4 cm horizontal accuracy at 120 m, and 5 cm vertical and 7.5 cm horizontal at 300 m, under test conditions.

How much can the Zenmuse L3 cover in a day?

Up to 10 km² per flight on the Matrice 400 and up to 100 km² in a day, depending on altitude, overlap and conditions.

Can LiDAR see through trees?

Partly. The laser finds gaps in the canopy, and with up to 16 returns per pulse the L3 records hits on leaves, branches and the ground below, so you get a bare-earth model under most vegetation.

What's the difference between the Zenmuse L3 and Zenmuse P1?

The L3 is LiDAR with mapping cameras, best for terrain under vegetation, corridors and very large areas. The P1 is a photogrammetry camera, best for orthomosaics and textured 3D models of open ground and structures.

Is the Zenmuse L3 laser eye-safe?

Yes. It's a Class 1 laser under IEC 60825-1:2014.

Who supports the DJI Zenmuse L3 in Australia?

Sphere supplies and supports the Zenmuse L3 across Australia, with training and servicing from our local team.

Talk to us about DJI Zenmuse L3

Tell us what you need to inspect or find, and where. We'll recommend the right setup for your team, whether you fly it yourself or have us operate it for you.

Pricing, availability and lead times
Site assessment and installation
Training for your team, or flying it for you under our CASA approvals
Managed operations through our Hubs and Curo

Prefer to talk? Call us on 1800 119 111.

(*Mandatory fields)

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.